MRM Stiletto Parts
Description
Multi Rotor Mania Stiletto Parts Repository - Here Are All The Official Parts For The Mrm Stiletto. There Are Multiple Arm Sizes, Make Sure To Select The Appropriate Part If It Is Motor/Arm Associated. ***All Parts Are Intended To Be Printed From Tpu Or Similar Flexible Materials*** Some Parts Require Multiples. Mirror And Duplicate On The Bed As Necessary Mrm Stiletto - Canopy: Micro Camera (Foxeer, Runcam, Or Equivalent Size) Mount That Offers A Full Front Protection, Rx Antenna Mounts And Sleek Lines. Mrm Stiletto - Canopy - No Antenna: Micro Camera (Foxeer, Runcam, Or Equivalent Size) Mount That Offers A Full Front Protection. Mrm Stiletto - Micro Camera Mount: Simple Mounts For Micro Cameras, Runcam Micro, Foxeer Micro Or Equivalent. Mrm Stiletto - Sma Antenna Mount: Standard Or Tbs Style Sma Mount(Also Works To Route A Dipole Through It) Mrm Stiletto - Axii Antenna Mount: Axii U.Fl Or Mmcx Mount Mrm Stiletto - 6Mm Arm Protection: Fits 6Mm 5" Arms. Arm Protection Extended On Front. Aids In Launch Preloading Mrm Stiletto - 6Mm Arm Protection- Bland: Fits 6Mm 5" Arms. Simple Arm Protection Without Extensions. Mrm Stiletto - 5Mm Arm Protection: Fits 5Mm 4" Arms. Arm Protection Extended On Front. Aids In Launch Preloading Mrm Stiletto - 5Mm Arm Protection- Bland: Fits 5Mm 4" Arms. Simple Arm Protection Without Extensions. Mrm Stiletto - Soft Mounts: Soft Mount Option When Arm Protection Is Not Desired. Mrm Stiletto - 20Mm Stack Adapter - 2Mm: Used To Mount A 20X20 Fc And Esc Stack. Highly Suggest Petg For This Part! Thread The 2Mm Holes For The Stack With A Tap If Using Nylon Hardware For The Stack Mounting. Make Sure The Frame Bolts Are Flush With The Top Of The Nutserts Bevore Installign The Stack Mount Over The Nutserts. Mrm Stiletto - 20Mm Stack Adapter - 3Mm: Used To Mount A 20X20 Fc And Esc Stack. Highly Suggest Petg For This Part! Thread The 3Mm Holes For The Stack With A Tap For The Nylon Hardware For The Stack Mounting. Make Sure The Frame Bolts Are Flush With The Top Of The Nutserts Bevore Installing The Stack Mount Over The Nutserts. 5Mm Antenna Tube Mount: Antenna Routing That Securely Holds And Antenna Tube. Route Your Receiver Antenna Up Through The Small Hole In The Bottom. Mirror In Slicer To Print Opposite Side. We Print All Parts At A 0.2Mm Layer Height In Tpu. Typically 25% Infill Works Well On These Small Parts. 3 Perimeters 4 Top & Bottom Layers. Support As Required
Statistics
Likes
15
Downloads
0