PIDFlight Lap Timer case with XT30 & Regulator
Description
Here'S My Own Case For [Pidflight'S Lap Timer](Https://Www.Pidflight.Com/Pidflight-Lap/). It'S Made To Fit **A Protoboard Cut Down To A Little Less Than 55X85Mm** - Refer To The Pictures Above To See How I Arranged Components On Mine. _I'Ve Used An Arduino Pro Mini Instead Of A Nano Because That'S What I Had Available At The Moment, But The Same Disposition Will Fit A Nano In The Same Spot Without Any Problem._ The Case Has Holes For A Female Sma Connector As Well: You May Or May Not Want To Attach An Antenna, I'M Currently Doing Fine Without One And I Don'T Think That Increased Sensibility Would Help In This Specific Use Case; Lower Accuracy Would Effectively Mean More Precise Lap Times. The Voltage Regulator That I Used Came With Another Piece Of Kit That I Had Lying Around, But It Seems To Be [This One](Http://Www.Goodluckbuy.Com/Dc-Dc-Power-Module-Regulator-5V-Output-Voltage-Buck-Module-Converter-Dm02-5.Html). --- [Onshape Source Here](Https://Cad.Onshape.Com/Documents/290574Fc97B5Acbeaa2D5643/W/Ac487C373318C33B1821B7D5/E/C950Ac58593D5D2C5Cf7Ac3B).
Statistics
Likes
2
Downloads
0