RotorX Atomic Fox Race Canopy
Description
This Is A Modified Version Of The Rxaf Standard Canopy. I Have Modified It To Be Better Suited To Racing And To Better Protect The Camera. Printed In Tpu With .2 Layer Height Without Supports. The Photos Show A Comparison Between The Stock (Orange) And The Modified. The Differences Are The Naca Aerofoils On The Front To Protect The Camera, The Small Bump Just Behind The Camera, A Plate To Block Camera Angle Depression And A Height Increase Of 15%. Edit: New Version Is Out! Now With 4 X M3 Locknuts To Secure The Canopy. I Have Used M3X14 Bolts Instead Of The Supplied Hardware. You Will Have To Flex Down The Internal Hex Trap For The Forward Nuts To Fit Them Into The Trap. It Is Possible And I Have Done It. Ensure You Put The Nylon Lock Towards The Top Or It Will Slip In The Trap. This Is As Far As I Will Be Taking This Project, Having Gotten It To A State Where I Am Happy With It. Feel Free To Remix It And Make Any Other Changes You Want.
Statistics
Likes
13
Downloads
0