Adafruit Crickit Pad
Description
This Is A Handy Pad For The Adafruit Crickit. It'S Used To Protect The Bottom Of The Crickit To Avoid Shorting The Electrical Contacts Due To The Contacts Being Exposed. This Is A Very Easy Quick Print. I Used 2.5 Mm Nylon Screws And Standoffs. You Can Use That Or 3Mm. I Used Nylon Since Its An Insulator. I Used Different Materials In Printing The Pad. I 3D Printed It Petg (Lighter Green_Ffcp), Nylon (Black_Um3) And Ninjaflex(Red_Um2+), See Above Pictures. All Materials Seem To Have Kept The Same Tolerances. The Dark Green Is Cut By A Glowforge Laser Pro Cutter. The .Svg File Is Attached. Note: The Triangle Top Point Printed On The Pad Goes To The Side With Power.
Statistics
Likes
3
Downloads
0