Flower watering ball (bulb?) / Bewässerungskugel für Blumen

Description

Update 31.05.2019: This Thing Now Has A Big Sister. You Can Find It Here: Https://Www.Thingiverse.Com/Thing:3665139 Update 30.07.2018: I Recently Tinkered Around With The Settings And Learned The Following: -You Can Print This Airtight With 0.2 Mm Layer Height With The Extrusion Multiplier Set To 150% -When Printing In 0,1Mm Layer Height The Extrusion Multiplier Just Needs To Be Increased To 130% -When Setting Up The Post Processing For The Speed Change Choose 'Change Speed' And Not 'Change Print Speed' Because That Caused Failed Prints For Me. Also I Added Gcode Files (Marlin Flavor) With 0,15 Mm Layer Height That Have The Postproccessing Set Up Correctly And Work Flawlessly With My Ender 2 (Check Out The Pictures).They Should Work With Any Printer That Has At Least The Same Bed Size As The Ender 2. They Might Just Be Printed Off Center. The Files All Are The Same Except For The Temperature Settings. I Made One For Normal Pla, High Temp Pla And Petg. The Values At The End Of The Name Mean The Following: Nozzle Temperature Of First Layer, Nozzle Temperature For The Rest, Bed Temperature. For My Petg (From Das Filament) It Is 240°C For First Layer, 230°C For The Rest And 75°C For The Bed. If You Need Different Temperature Settings Contact Me. Cheers And Happy Printing! ---------------------------------------------------------------------------------------------------------------- I Got Inspired By Those Fancy Plant Watering Balls (Or Bulbs?) That You Can Put Into Your Flower Pot To Have A Small And Consistent Water Flow Over Time. So You Can Leave Your Plants Unattended For Some Time. Feel Free To Modify Or Remake This. The Only Constraint You Have When Designing This Is Overhangs And A Fixed Outer Diameter At The Outlet Of 9Mm (Or Less). This Fixed Diameter Is Needed To Keep The Water In And Only Slowly Draining It. For A Stable Print You Need To Flip It Around So The Open Side Is Touching The Buildplate.

Statistics

Category

Tags