Fishing Lure Attempt 1
Description
This Is My First Attempt At A Fishing Lure. It Has Holes And An Inner Channel So You Can Run Wire Attachment Points At The Front For Your Line And One On The Bottom And Tail For Hooks. It Also Has A Small Pocket At The Front So You Can Add Weights/Rattles. I Printed The One In The Photos Using Glow In The Dark Abs With A 0.4Mm Nozzle, 0.2Mm Layers, 100% Infill, And A 4Mm Brim To Keep The Halves From Warping. I Also Printed It At 75% Scale, Since I'M Using It In A Freshwater Lake And Sketched It A Little Bigger Than I Wanted It To Be. Once I Had The Wire Laid Out How I Wanted It, I Used Ca Glue To Attach The Halves Together, And Then Smoothed The Seam With A Paper Towel Dabbed In Acetone. I'M Mostly Happy With How It Turned Out And Will Probably Make More Lures Over The Season.
Statistics
Likes
15
Downloads
0