Tevo Tarantula Dual E3d V6 X carriage
Description
After I Used The Existing Dual E3D V6 Design, I Quickly Realized I Needed The Ability To Calibrate The Hot Ends Z Offsets, While Remaining Accurate In The X-Y Position. This Is My 2Nd Design For An X Carriage That Allows Such Flexability This Design Locks The Xy Position With A V Slot (Using A Single M4 Screw And Nut In The Back Of The V). Z Adjustment Is Done By Loosening The M4 Screw And Relocating The Hot End At The Desired Height.
Statistics
Likes
3
Downloads
0