Filament Respooling Device
Description
With This Device You Can Respool Any Filament On The Standard Spools With A Inner Diameter Of 52Mm. The Device Is Designed With A Slight Conical Shape So It Should Hold Enough To Make The Winding Tight. The Other Side Have A Diameter Of 10Mm Which Should Fit Any Common Chuck Of A Akku-Drill. I Printed The Big Side With 2 Perimeters And 5% Infill While The 10Mm Diameter Has 5 Perimeters And 30% Infill. Like This, Its Strong Enough. Print With The Big Side On The Bed. The 45° Chamfer Should Allow It To Print Without To Big Overhangs. In The Video You See How It Works: Https://Youtu.Be/M8Uaqxgrelo
Statistics
Likes
25
Downloads
0