4020 blower to 30mm fan mount adapter
Description
I Have Come To The Conclusion That My Little 30Mm Fan Isn'T Cooling My E3D V6 Hot End Enough. I Designed This Adapter That Lets Me Mount A 4020 Blower To A 30Mm Fan Mount. It Aligns To The Top And It Fits Under My Effector But It Does Hang Out The Back Pretty Far So Be Careful With Larger Prints. When I Do My Bed Leveling Routine The Back Of The Blower Is Right Up Against The Black Timing Belts On My Z Tower, Just Barely Touching. I Love These Led Strips. The Adhesive Wasn'T Strong Enough So I Super Glued Them To The Bottom Of The 4020 Blower. I Wired Them Up In Parallel With The Blower. My Printer Is Set To Automatically Turn On The Hot End Fan At 50 Degrees. Perfect. The Led'S Come On Also. I Used (1) 3X20Mm Socket Head Screw And (1) 3Mm Nut To Secure The Blower To The Mount. I Used (2) #4 Sheet Metal Screws, 1/2" Long, To Secure The Adapter To My Fan Shroud. Printed In Pla .2 25%
Statistics
Likes
6
Downloads
0