Gears for box joint jig
Description
This Is A 3D Printable Bevel Gear Set That Will Work In Matthias Wandel'S Screw Advance Box Joint Jig. Wandel Offers Numerous Gear Set Options In His Thorough And Very Affordable Construction Plans Which Are Available On Woodgears.Ca. The Collection I Provide Includes 12 And 16 Teeth Axle Gears, And 24 And 32 Teeth Cranking Gears. Cranking_Gear + Axle_Gear = Spacing In Inches Per 1 Turn, 2 Turns, 3 Turns 32 + 16 = 1/8, 1/4, 3/8, ... 24 + 16 = 3/32, 3/16, 9/32, ... 32 + 12 = 1/3, 2/3, 1, .. 24 + 12 = 1/8, 1/4, 3/8, ... Note That That If Your 3D Printer Bed Is Too Small To Print The 32-Tooth Gear, You Can Just Print And Use The 24-Tooth Gear Because The 24-12 Pairing Gives The Same Results As The 32-16 Pairing. Matthias Wandel Makes His Gears Out Of Plywood, But I Find That These Plastic Gears Mesh Much More Smoothly Than The Plywood Gears I Have Made Given The Level Of My Bandsaw Skills. Unfortunately, These Gears Will Not Mesh With The Other Plywood Gears I Have Made. I Have Also Included A Sketchup Component For A Single Gear Tooth, Which You Can Adapt To Design Your Own Beveled Gears For A 90° Meshing Orientation If You Wish. Wandel'S Box Joint Plans Are Available At Http://Woodgears.Ca/Box_Joint/Plans/Index.Html While You Are On His Website, Be Sure To Look At His Other Offerings.
Statistics
Likes
68
Downloads
0