Tevo Black Widow Titan Mount + (Hotend and Model ducts)

Description

# Why? Tension Bolt Is Free! Bltouch Doesnt Need 'Special' Long Curved Mount - Its Just Below E-Motor - On The Same Plastic Part, Duct Is ~13Mm From Nozzle, Fan ~16Mm From Nozzle, Close Enough To Cool Down Things. I Didn'T Find Ready To Use Designs, So... # Additional Parts (Not Included With Titan And Stock Black Widow) 2Xm5X20 Bolts And Nuts To Mount Base (It Uses 4Xm5 Bolts) - Flathead Preferrred, 1 Flathead Is Required If U Will Use Attached Duct (Read Assembly) (Optional) 4Xm4X30 (Or Longer) Bolts And Nuts For Model Duct (Optional) Single 50Mm 24V Radial Fan (Can Be [Ordered Here](Https://Www.Aliexpress.Com/Item/24V-Dc-50Mm-Blow-Radial-Fan-Cooling-Hot-End-Extruder-For-Reprap-I3-3D-Printer-Blow/32818554766.Html?Spm=2114.Search0104.3.1.183E1470C615T0&Ws_Ab_Test=Searchweb0_0,Searchweb201602_2_10152_10151_10065_10344_10068_5722815_10342_10343_10340_5722915_10341_10543_5722615_10696_10084_10083_10618_10307_10301_5722715_10059_100031_10103_10624_10623_10622_5722515_10621_10620,Searchweb201603_11,Ppcswitch_5&Algo_Expid=267072A6-E7F8-40E8-9Ef8-123C5Eb29B9A-0&Algo_Pvid=267072A6-E7F8-40E8-9Ef8-123C5Eb29B9A&Transabtest=Ae803_2&Pricebeautifyab=0)) # Bltouch Bltouch Mount Is In The Base, If U Use It - No Additional Mount Is Required, If Dont - U Will Have Some Unused Holes. Marlin (1.1.8) Offsets Is #Define X_Offset -26 #Define Y_Offset 29 #Define Z_Offset 0 Old Style #Define X_Probe_Offset_From_Extruder -26 #Define Y_Probe_Offset_From_Extruder 29 #Define Z_Probe_Offset_From_Extruder 0 # Hotend Designed For *Original Tevo Black Widow Hotend* Which Goes With *Tevo Titan Extruder*. If U Have Original E3D Hotend (Https://E3D-Online.Com/V6) Then Heater And Thermistor Wires Will Go Toward To U, Which Isn'T Very Good, But If Its Ok - This Mount Will Do The Job. Volcano - Not Tested - But May Work, If U Try And It Will Work - Msg Me Please. # Materials Better To Use Abs For All Parts Base - Abs (Better) Or Pla (Will Work) - Both Tested, But Pla Will Deform Eventually Due To E-Motor Temperature Hotend Duct - Abs Only - Pla Will Deform - Too Close To Heater Model Duct - Abs, Pla May Work (~9Mm From Hotend) But Not Tested Model Duct Mount Helpers - Abs Or Pla # Printing Hotend Duct - As Is, No Supports, Ooze Shield For Better Results, 0.2Mm Base - Rotate On X Axis -90 Degree, Use Supports And Ooze Shield For Better Results, 0.2Mm Rduct - Rotate On Y Axis 90 Degree, Use Supports For Better Results, 0.2Mm Model Duct Mount Helpers (2Pcs) - Rotate On X Axis -90 Degree - Ooze Shield For Better Results, 0.2Mm # Assembly 1. Print Hotend Duct (No Supports) 1. Print Base (Use Supports As It Has One Big Hole For E-Motor, Or Place It Manually) 1. (Bltouch Only) Mount Bltouch Into The Base 1. If U Plan To Use Duct - Place 2 M4 Bolts Into Second Row (From Top) On The Right Side Of Base (Check Photos) 1. Put E-Motor 1. Mount Titan Extruder With E-Motor By Screwing 3Xm3 Bolts (Included With Titan) 1. Mount Hotend Duct (See Photos) - It Must Fit Tight Into Radiator (See Photo #4) 1. Place Wires 1. Mount Base (Read Below If U Plan To Use Duct) 1. (Bltouch Only) Update Firmware (Google How To) (Optional) If U Will Use Duct 1. Use Flathead For Right Bottom Bolt When Mounting Base (See Photos) 1. Print Duct (Using Titan Already) - Duct Requires A Little Bit Supports Or Model Fan 1. Place Radial Fan On Duct 1. Put Nuts Into Two Helpers 1. Mount Duct Using Helpers - Dont Tighten Nuts Now 1. Calibrate Duct Height - It Must Be ~2Mm Above The Nozzle 1. Tighten Duct Mount Nuts You Are Done

Statistics

Category

Tags