Fishing Rod Holder for EMT conduit
Description
This Is A Remix Of A Popular Fishing Rod Holder Like A Scotty Style Rod Holder. This Version Will Clamp On Standard Emt Conduit That Is 3/4" (Inches) In Diameter. The Inside Is The Correct Size To Fit A Pvc Pipe With A 41.8 Mm Diameter Or 1.6" (Inches). I Just Glue The Pvc In With Pvc Glue Or Ca Glue Seems To Work Well And Is A Lot Faster Than Printing Out Long Tubes On The Printer. The Bolt Recesses Are Modeled For 12.6 Mm Bolt Heads 1/2" Hex Head With 7.75 Mm Shaft (0.30 In). I Believe These Are The 5/16 Bolts You Get At The Store I Get Them In Lengths Of 69 Mm Or 2 3/4" (Inches). The Base Just Uses Standard Cylinder Hex Head M3 Bolts I Think 50Mm-55Mm Long Work Really Well For Going Over The Emt. The U Clips Should Fit Over 3/4" Od Conduit. Printing Can Be Done With Hole Down And Supports Inside The Tube. I Haven'T Worked On This Project In Ages...But I Am 75% Confident That The Files I Am Uploading Now Are My Latest Iteration, Let Me Know If There Are Any Fitting Issues As I Have Switched Computers Since I Started This Project. Ya Know How It Goes.
Statistics
Likes
33
Downloads
0