Yongnuo 560 Barn Doors

Description

Thanks To Joherz And Aussie_Jo For Their Models. I Took The Barndoors Aussie_Jo Made And Reworked Them A Bit For My Use. I Modified The Hinges So They Will Print Flat On The Bed, Then I Made A Larger Set Of Barndoors. I Used The Accessory Mount I Made From Joherz' Model As A Starting Point To Merge With Aussie_Jo'S Model. It Can Be Found Here: Https://Www.Thingiverse.Com/Thing:2955150 Because It Is A Mashup Of Two Models, It May Not Be The Most Elegant Mount, But I Didn'T Want To Spend More Time Refining It. These Should Fit Yongnuo 560 Iii'S And Iv'S, But May Also Fit Other Flashes. To Print, You Will Need To Print One Barndoor Holder, Two #1'S And Two #2'S For Doors. You Choose The Long Or Short Versions. Once Printed, I Tapped The Mount Holes For 4Mm Bolts To Attach The Barndoors. I Used 4Mm X 16Mm, But You Can Probably Use Shorter Bolts.

Statistics

Category

Tags