Camera Light Ring (Triangle)

Description

Light Ring, (Triangle) Using Led Strips Designed For My Nikon D3200, Nikon Dx 18-55Mm Vr Lens. Using Standard 10Mm Wide Dim-Able Led Strip. Using 3, 10Cm Sections Soldered Together And Attached To A Dim-Able 12V Power Supply. Again To Get My Setup You Are Going To Have To Do Some Soldering I Suggest You Do The Measuring And Soldering Before You Attach To The Triangle As The Plastic Will Definitely Melt. I Also Used Hot Glue To Insulate The Leads And Help Secure To Base, The Glue On The Strips Is Sticky But Not That Sticky. May Fit Loose I Used A Strip Of Blue Painters Tape Layered In The Inside To Make It Fit More Snug To The Lens.

Statistics

Category

Tags