Ultimaker S5 Axis Alignment Jig (X & Y)

Description

These Are 2 Jigs Used To Align The Ultimaker S5 X & Y Axis. There Are 2 Rod Sizes: The Central Rod That Runs On The X Axis Is 10Mm Diameter. All Others Are 8Mm Diameter. Therefore, There Is A Need Of 2 Jigs: 1) One That Connects The 10Mm Central Rod To The 8Mm Rods. 2) The One That Connects The 8Mm To 8Mm Rods. Every Notch Allows About 40 Degree Rotation, Useful When Trying To Adjust The Screwset On The Pulley. Recommend To Watch This Video From Makershop That Illustrates The Process And How To Use The Jigs. They Did A Really Nice Job To Show The Process And How To Loosen/Tighten The Screws. Xy Axis Alignment Video: _Https://Www.Youtube.Com/Watch?V=Mrmk2Wspvnw_ The Notches Are 8.1Mm And 10.1Mm And They 'Click' Nicely In Position. When Trying To Remove The Jig, Turn The Jig On The Side, It Detaches Easily. Also Need To Be Careful When Placing The Jigs In The Rods That Hv Belts Running Along Them Not To Create Pressure Or Tension On The Belts Themselves.

Statistics

Category

Tags