Z Axis Motor Spacer for lowering motor
Description
I Made This To Drop My Z Axis Motors After Installing A Wobble Fix Which Created Fouling Of My Brass Nut And Downloaded Couplers. It Fits Between Your Motor And The Printer Frame, The Motor Becomes Offset So You Can Screw It All Together With Simple Bolts. Totally Safe To Have The Motors At An Angle By The Way. Bolt To Your Motor First Then Line Up And Screw To The Frame I Have Since Printed A Lot Of Things And Had No Issues, Good Luck I Hope This Helps Someone! You Will Need Some M3 Bolts, I Had Enough Left Over From My Build. A M3 Tap Would Help But You May Be Able To Just Self Tap The Threads With The Bolts. Coupler Design Https://Www.Thingiverse.Com/Thing:1651349 Anti Wobble Https://Www.Thingiverse.Com/Thing:808509 Frame Top Upgrade Https://Www.Thingiverse.Com/Thing:2866394 Z-Screw Adjust (May Also Be Useful For This Setup) Https://Www.Thingiverse.Com/Thing:2728300
Statistics
Likes
2
Downloads
0