Press mold for microUSB type B like Г UP
Description
This Molds For Molding Micro Usb Type B Like Г Upper Plug Connetors. I'M Use Hot Glue With Hot Glue Pistols For Made This Connectror. And I Have Best Quality With Layer Thickness - 0,1 Mm Nozzle Diameter - 0.5 Mm Maybe If U Use 0.05 Mm Layer Thickness U Have Better Quality Before Pouring Hot Glue Lubricate The Form Of Motor Oil Or Vaseline. After Pouring Wait 30 Min And Open The Form/ How To Use These Forms: 1 - First Of All - Print Out, The Thickness Of The Layer Should Be From 0.05 Mm To 0.1 Mm, The Nozzle With A Diameter Of 0.5-0.4 Mm (Well, Or A Cnc Drill With A Metal Cut) 2 - Solder The Connector With Wires According To The Power Scheme Of Your Gadget 3 - Lubricate The Mold With Petroleum Jelly Or Clean Engine Oil 4 - Insert The Soldered Connector Into One Part Of The Mold, Cover The Second 5 - Drag The Rubber Band For Banknotes Or Tie It With Thread So That It Does Not Open 6 - Preheat The Glue Gun 7 - Using A Gun To Extrude The Hot Glue Into The Molds 8 - Allow To Cool For 20-30 Minutes 9 - Disassemble The Form And Remove The Connector, Wipe Off Vaseline Or Oil With Dishwashing Detergent 10 - Use Fill Can Even A Liquid Rubber With A Hardener. Subscribe Me If U Like My Things ) If You Want To Support Me: The Best Way To Say "Thank You" Is To Send A Dollar (Or More) Alas, I Can'T Accept Paypal, But I Can Give You The Number Of The Card (Reality Of Life In Ukraine)
Statistics
Likes
48
Downloads
0