Microscope Mount for Sony Cyber-Shot Camera
Description
Adjustable Camera Mount For Amscope Microscope. Designed To Fit A Sony Cyber-Shot Dsc-W830, But The Eyepiece Is Adjustable So It Will Probably Fit A Lot Of Cameras Of Similar Dimensions. The Bracket Slides Back And Forth On Rails To Allow The Lens Of The Camera To Extend And Retract. Hardware: 1X M6 Nut, 1X M6 Hex Bolt (Cut To 26.5Mm), 2X M3 Cylinder Head Bolts, And 1X Imperial 1/4-20 Hex Bolt (Cut To 42.5Mm). I Added A Small Printed Washer To Retain The 1/4-20 Bolt. It Threads Very Snugly Onto The Bolt. It May Require A Bit Of Sanding Down Depending On Your Printer Accuracy, But You Should Be Able To Turn The 1/4-20 Bolt Without It Falling Out, And The Camera Should Not Snug Up Against The Washer. In Other Words, The Washer Should Be Recessed And Be Able To Spin Freely In Place. In The Full Piece Set There Is Two Of Them Just In Case You Ruin One Of Them Trying To Thread It Onto The Bolt. This Device Fits Snugly On My Microscope Eyepiece Which Has A Diameter Of 26.5Mm. It Fits Loosely On The Lens Of My Camera Which Has A Diameter Of 29.7Mm.
Statistics
Likes
4
Downloads
0