Tronxy XY-08n mount for e3d v6 Carriage by TNS
Description
This Is A Tronxy Xy-08N Bed Leveling Sensor Mount For The [Customizable E3D V6 Carriage / Bowden Mount By Tns](Https://Www.Thingiverse.Com/Thing:2099577). I Took The Actual Mount Plate For The Sensor From [Achmed20'S Design](Https://Www.Thingiverse.Com/Thing:2136203), But His Didn'T Fit Together With Tns'S E3D Carriage Design. This Is A Replacement Cap Only. You Will Still Need The Rest Of The Files From Tns'S Design. I Also Highly Recommend Using The Nut_Holder.Stl File From Achmed20'S Design. It Will Make It Easier To Tighten The Screws And Keep The Sensor From Moving Around. Marlin Settings For This Are Below (Note, The Z-Offset Is Adjustable So Yours Will Likely Differ - X And Y Should Be Correct, However): #Define X_Probe_Offset_From_Extruder 32 // X Offset: -Left +Right [Of The Nozzle] #Define Y_Probe_Offset_From_Extruder -1 // Y Offset: -Front +Behind [The Nozzle] #Define Z_Probe_Offset_From_Extruder -1 // Z Offset: -Below +Above [The Nozzle]
Statistics
Likes
14
Downloads
0