Anet A8 - Y-Axe Tensioner for M5 pulley
Description
After I Testet Most Of The Y-Tensioner Out There, It Came Like Everytime: I Made My Own. Why? - Some Are Too Weak And Broke (In Resepct Of The Designs I Dont Link Them) - Some Do Not Fit, Cause They Are For A Different Anet A8 (Earlier Designs) - Some Do Not Fit For My Understanding Of "Fit" (0.9Mm Space To The Frame Is Too Much) - And So On. This One Is 0.1Mm Spacing To My Frame, Which Is The Early 2018 One Of The Anet A8. You Need 4 Screws, M3X16Mm And 4 M3 Nuts. + M5X25Mm For Mounting The Pulley In Place. The Holes In The Parts Are 4,6Mm So No Need For A Nut. The Printed Screw Is A M14X2 , So You Can Use Also The Screws From The Other Designs. Most Use The M14X2 I Printed. If You Print Mine, Be Sure Your Printer Is Well Calibrated! The Tolerance Is Very Small, Thats My Understanding Of A Good Print And Of Course Printer. Have Fun With The Part. And Look Also To My Other Designs. Picture I Make When My Camera Is Back....
Statistics
Likes
16
Downloads
0