Dual extrusion Y-Splitter with thread
Description
This Is An Y Splitter Using M5 Push Fittings And An M5 Nut Trap To Make It Durable. The Simplify3D Script Was Created By: [Axmod3Dprint](Https://Www.Thingiverse.Com/Thing:1926351) #### All Files And Photos Can Be Found At: [Github](Https://Github.Com/Nimmlor/Y-Splitter/) ## Assembly ### You Will Need - 3X M5 Nuts - 3X [Pc4-M5 Push Fitting](Http://S.Click.Aliexpress.Com/E/Rvfujub) - 3X M3 * 10Mm - 3X M3 Nuts - Tubing, 4Mm Outer Diameter The Tubing Must Be Cut Into 3 Pieces. 2 Pieces Must Have An 45° Angle On Their Ends, It'S Recommended To Mount The Tube In A Vise, Afterwards It Should Be Cut With A Hobby Knife. Then The Two Halfes Get Screwed Together, Next Push In The M5 Nuts And Screw In The Fittings. <Img Src="Https://Github.Com/Nimmlor/Y-Splitter/Blob/Master/Cut_Open_Cropped.Jpg?Raw=True" Width="40%" Align="Middle"> ## Setup ### Settings In Simplify3D Tool Change Retraction Distance: 8Mm Tool Extra Restart Distance: 3Mm Tool Change Retraction Speed: 40Mm/Sec ### Tool Change Script For Simplify3D `G91; Relative Coordinates` `G1 Z+1 F420; Lift Z For Tool Change` `G1 X50 Y50 F4800; Move X Y For Tool Change` `G90; Absolute Coordinates` `T[Old_Tool]; Select Old Tool` `G92 E0; Zero Extruder` `G91; Relative Coordinates` `G1 E-5 F10000; Fast Retract 5Mm` `G1 E2 F10000; Fast Reinsert 2Mm` `G1 E-47 F10000; Fast Retract 47Mm` `G4 P3000; Pause 3Secs` `G1 E-60 F1000; Fast Long Retract` `G90; Absolute Coordinates` `G92 E0; Zero Extruder` `T[New_Tool]; Select New Tool` `G92 E0; Zero Extruder` `G91; Relative Coordinates` `G1 E105 F10000; Fast Insert 105Mm` `G1 E5 F300; 5Mm/S Feed 5Mm` `G92 E0; Zero Extruder` `G1 Z-1 F420; Return Z To Resume Printing` `G90; Absolute Coordinates`
Statistics
Likes
178
Downloads
0