MRM Micro Scythe Parts
Description
Original Mrm Parts For The Mrm Micro Scythe ***All Parts Are Intended To Be Printed From Tpu Or Similar Flexible Materials*** Some Parts Require Multiples. Mirror And Duplicate On The Bed As Necessary. (Arm Protection) Mrm Micro Scythe - Micro Camera Mount: Fits A Micro Foxeer, Runcam Or Equivalent Sized Micro Camera. Printed Best On Its Back. Mrm Micro Scythe - Sma Antenna Mount: Fits An Sma Pigtail. Compatible With Standard Nutted Or Tbs Flange Styles. Print With Support As Required. Mrm Micro Scythe - Sma Antenna Mount - Flat Top: Print Upside Down. Same As Standard Mount Above, But Can Be Printed From The Top Down Since The Top Plate Interface Has Been Removed. Should Not Require Supports Mrm Micro Scythe - Arm Protection Front: Arm Protection For The Front Arms. Keep The Frame Arms Protected From Crash Damage. Mrm Micro Scythe - Arm Protection Back: Arm Protection For The Back Arms. Keep The Frame Arms Protected From Crash Damage. We Print All Parts At A 0.2Mm Layer Height In Tpu. Typically 25% Infill Works Well On These Small Parts. 3 Perimeters 4 Top & Bottom Layers. Support As Required
Statistics
Likes
2
Downloads
0