All-In-One 3D Printer Test
Description
After Having Looked At Several Printer Tests, I Decided To Make My Own. I Wanted To Stretch Mine A Little Further Than The Others Went. This Has A Lot Of Tests In It, If You Know Where To Look. I'Ll Try To Mention Them Below: * Overhang Test (5 Degree Increments) * Hole Inner Diameter Test (5Mm, 3Mm, And 1Mm) * Stringing Test (With Varied Distances Between Pillars For Both X And Y Axis) * Bridging Test (Also Tests How Accurately Towers Connect At Different Heights) * 20X20X20Mm Cube Test (Yep, It'S Built In!) Now The Not-So-Obvious Tests: * Smooth Wall Testing (For Zits And Blobs) * Convex And Concave Spheres (Tests Surface Quality Of Curves) * Sharp Angle Test (Side Of Overhang Wall, Cylinder Cutout) * Flat Surface Finish Test * Pyramid Surface Finish Test * Cone Surface Finish Test * Small Embossed Text Test (All The Text) =============================================================== If You'D Like To Support My Work, Or Buy Me A Monster (I Don'T Drink Alcohol Or Beer), You Can Head Over To My Patreon Page: Www.Patreon.Com/M1Dn1Ghtn1Nj4 A Portion Of Every Months Earnings Goes To A Charity Chosen At The End Of The Month!
Statistics
Likes
136
Downloads
0