Simchair MKIII I2C single engine collective lever
Description
----------------------------------------- Important! Please Use Latest Files From Github: Https://Github.Com/Hc625Ma/Simchair_Models/Tree/Master/Components/Peripherals/Single%20Collective Visit Http://Hc625Ma.Org For Latest News And Manuals! ------------------------------------------- This Is A Single Engine Collective With Head Support! It Is A Successor Of A Twin 412 Lever (Https://Www.Thingiverse.Com/Thing:2747131) With Some Improvements. Throttle Turns 200 Degrees. Its Outer Diameter Was Increased To 40Mm, Like In A Real Huey. This Allowed For A Cable Channel To Be Fitted Into The Throttle Frame. Another Very Important Upgrade Is A New, Improved Tensioner. I Have Added Rubber Bands To It To Counter The Weight Of The Head, So No Matter How Much It Weights, This Lever Will Move As Smoothly As The Simple One. I Have Tested It For A Week With A Heavy Enough Head Mockup (Used My Old Cyclic Grip For This Purpose, You Can See It On Photos) And Really Liked The Results. The Lever Is Intended To Be Used With An I2C Controller (The Latest Software Is Always Available On Github: Https://Github.Com/Hc625Ma/Simchair_I2C) A Simple Calibration Process Is Required For The Collective After Assembling (Look At The Video Below) Please Visit Http://Hc625Ma.Org For News, Tutorials, And Upgrades. Parts List: M8X75Mm Screws 4Pcs M3 50-20 Mm Screws (All Sizes With A 5Mm Step) M3 Regular And Nyloc Nuts M4X80Mm Screw 1Pcs M4 Nyloc Nut 1Pcs 608Zz Bearings 2Pcs Ss495A Hall Effect Sensor 1Pcs (Https://Goo.Gl/1Mxfrz) 10Kohm Linear Potentiometer 1Pcs (Https://Goo.Gl/Vbi1Zh) 6X6X4Mm Square Magnet * 1Pcs Wires Rj-45 Connector, Ethernet Cable Aluminum Square Pipe 10X10Mm 1 X Simchair Mkiii I2C Controller (Https://Www.Thingiverse.Com/Thing:2919692) 1 X Arduino Pro Mini -- Update 03.07.2018 Added Idle Stop Mark (Without Detent) And Software Support For It. At The Moment It Works With Dcs Uh-1 And Dreamfoil B407. X-Trident Ab412 Will Be Added After The Release Of An Upgraded Twin Lever. After Some Testing, I Can Say That There'S No Need In The Simple Collective Anymore, Use This One Instead, It'S Really Good. -- Update 12.07.2018 Fixed An Idle Stop Mark Position. Please Re-Download I2C_Connector_Cover.Stl Uh-1 Collective Head Development Snapshot Is Available At My Site: Http://Hc625Ma.Org/
Statistics
Likes
78
Downloads
0