Udoo x86 mount for 80mm fan
Description
After Over A Year Of Using The Udoo X86 Ultra As A Small Media Solution For The Living Room The Small Fan That Came With It Became Quite An Annoyance. To Get Rid Of The Noise But Still Supply Sufficient Cooling I Simply Sketched Out A Mount For An 80Mm Fan I Had Lying Around. I Know It Is Oversized, But I Have The Space. ^^ I Got The Necessary Pinout And Connector Information From The Udoo Manual And [This Thread](Https://Www.Udoo.Org/Forum/Threads/How-To-Fan-Adapter-Cable.7081/). Just To Spare You Some Time: I Bought A Cable With A Molex 51021-0300 Connector From Ebay And Soldered Each Of The Wires To The Ones Of The Fan. So, Just In Case Someone Else Is Having The Same Problem With The Udoo X86 I Am Sharing The Drawing Here. The Print Should Fit The Udoo X86 Heatsink And A Typical 80Mm Fan Nicely. It Can Be Easily Mounted With Some M3 (Lower / Udoo Part) And M4 Screws (Upper / Fan Part).
Statistics
Likes
3
Downloads
0