Assembled Prusa IT2 (OpenSCAD)

Description

This Is An Assembly Of The Prusa Mendel Reprap, Iteration 2. I'M Using The Variation With Slightly Longer X Axis Smooth Rods (412Mm) And An Extra 4 Nuts And 4 Washers On The Top (Allowing The Z-Motor-Mounts To Be Adjustable). Blue Rods Are Threaded Rods. I Lined These All Up By Hand, Using Openscad In Orthagonal Mode To Verify Each Aligned Hole, Etc. The Real Work Of This Thing Is The File Assembled_Jlk.Scad. In The Same Directory As This File, Place The The Contents Of The Directory "Metric-Prusa-Lm8Uu" From Inside Https://Github.Com/Prusajr/Prusamendel.Git (Which I Included In This Thing). I Also Used The Buddaschnozzle Model From Here: Http://Www.Thingiverse.Com/Thing:255907 Note: As An Exercise, I Did This Using Only The Actual Stl Files, Not The Openscad Source For The Parts That Generate Those Stls. Marking As A Work In Progress Because There Are More Things To Add That I Just Haven'T Gotten Around To. Edit: Saw That The Location Of The Bar Clamps On The Bottom Of The Triangles Was Off For Some Reason, Fixed It With _V2 And Removed Original.

Statistics

Category

Tags