Flowing Bird Temple
Description
For A Newer And Improved Version On My Own Website, Go To Https://Www.Designuitinspiratie.Nl/Golvende-Vogel-Tempel/ The Flowing Bird Temple Is A Feeder For Small Birds :-) I Printed This In Pla 0.2Mm Resolution And 0.4Mm Nozzle. The Roof.Stl Is Printed With Support Material Generated By Cura. After That I Super Glued The Parts Together. See The Pictures To See How The Parts Will Fit Together. I First Glued The “Base” Parts. Then The “Roof” & “Wedge” Parts. I Also Glued The M4X45Mm Bolt In Place Already, Because Later On (When All Parts Are Together) It Will Be Very Difficult To Do This. As Last Step I Glued The “Roof” , “Base” And All The White Parts Together. To Make This Model You At Least Need: 1X M4X45Mm Bolt And Nut 6X Base.Stl 6X Entrance.Stl 2X Mount Pin.Stl 1X Mount Ring.Stl 1X Mount Wedge.Stl 2X Mount.Stl 6X Pillar 2L.Stl 6X Pillar 2R.Stl 6X Pillar.Stl 6X Roof,Stl If You Have Any Questions, Feel Free To Ask :-) Do You Think I Forgot Something Or Made A Mistake? Feel Free To Comment :-) Ps: The Opening In The Middle Of The “Base” Is Intensional. It'S For Letting The Rain Water Out
Statistics
Likes
111
Downloads
0