Huge Seven Segment Display
Description
# Huge Seven Segment ## Printed Parts 7X Base.Stl 7X Top.Stl 4X Link-2-Way.Stl 2X Link-3-Way.Stl ## Hardware Components 7X Neopixel Strips (I Used 3 Pixels Long Strips Per Segment) Wires To Connect Them All Arduino Or Similar To Drive It ## Assembly Instructions 1) Glue (At Least I Used Glue) The Neopixel Strips To The Inside Of Each Base 2) Thread Three Wires (Power, Ground, Signal) Through The Holes In The Links (I Recommend Using Different Colors For Each Wire). Mind The Wiring Of The Two "3 Way Links" - Think Them Through ;) Check The "Wiring Guide"-Picture Above. 3) Snap The Links In To The Holes Of The Bases To Lock Everything In To Place 4) Cut/Strip The Wires And Solder Them To The Neopixel Strips 5) Snap The Tops On To The Bases 6) Connect The "Starting-Wires" To An Arduino Or Similar That Will Drive The Neopixels ## Code I'Ve Put Together A Simple Arduino Sketch That Shows How To Get Numbers On To The Display. It Can Serve As A Good Starting Point To Get You Going. You'Ll Find It [Over At Github](Https://Github.Com/Mattiasjahnke/Arduino-Projects/Tree/Master/Neo-Segment). ### Notes This Is Still A Work In Progress. What I'D Like To Address Is The Wire "Entry And Exit Point" Of A 7 Segment Display. Https://Youtu.Be/Z7Xdrmfpbp8
Statistics
Likes
138
Downloads
0