Prusa i3 MK3 PSU Cable Guide for IKEA LACK Enclosure
Description
A Simple Solution For The Psu Cables Being Too Short For The Prusa I3 Mk3 Ikea Lack Enclosure Design. This Is Just A Simple Cable Guide To Route The Cables From Below Directly To The Einsy Board. Instructions: Position Your Prusa I3 Mk3 In Its Final Position To Determine The Hole Location Beneath The Einsy Board. Drill A 1/2" Hole Through The Table. Place The Cable Guide In The Hole From The Top. First - Guide The Black/White Cable From The Psu Through The Cable Guide. Next - You Will Need To Separate The Red/Black Wires A Bit More And Guide Them Through One By One. Hook Up To The Einsy Board As Your Normally Would.
Statistics
Likes
39
Downloads
0