MPMD Effector Mount for E3D V6
Description
I Wanted To Upgrade To An All-Metal Hot End And Settled On The E3D V6. Obviously This Invited Some Problems - Namely That The Original Hotend Mount For The Effector Plate Would Not Work Whatsoever. I Wanted To Keep The Stock Snap-On Cooler For The E3D Hotend, So I Designed This. It Works Fine If You Print Without The Need For Part Cooling (Or You Do Part Cooling Seperately). You'Ll Need Two M3X16Mm Screws To Attach The Collar That Holds The Hotend In Place. The Rest Of The Hardware Comes Off The Stock Effector Mount.
Statistics
Likes
12
Downloads
0