Garmin Mount Adapter for ProClip
Description
This Ball Mount Is The Same Diameter As Garmin Gps Ball Mounts. I'Ve Found A Higher Layer Height (0.2Mm) Works Better, As It Gives The "Teeth" Of The Female Portion Of The Gps Mount More To Grab Onto. This Was Made In Tinkercad, So It'S Fairly Low Poly, But It Works. The Hole Spacing Is Designed To Match Up With Proclip Mounts. I Only Have 3 Holes Here Because I'M Using A Ram Mount Ball On The Other Three Holes Of The Mounting Plate. Printer Settings: * Layer Height: 0.2Mm (The Higher The Better, But Ymmv) * Material: Pla (It Works, But Can Deform In High Temperatures. Should Work With Any Material As Long As You Adjust For Shrinkage).
Statistics
Likes
4
Downloads
0