Marlin 1.1.8 for AL-1 Artillery and screw holders for Z
Description
Z-Axis Screw Holders And Firmware Marlin 1.1.8 For Al-1 Artillery Https://Ru.Aliexpress.Com/Item/Al-1-3D-I3-3D/32842943886.Html?Spm=A2G0S.9042311.0.0.274233Ediohtaq Board- Mks Base 1.4 Display-Reprapdiscount 20X4 Z Moves To 0.8 After Autohome Command - As On Original Fw <Code>#Define Manual_Z_Home_Pos 0.8</Code> Pid- By Default 1.1.8 Different: Extruder 98 Steps (Original=100) <Code>#Define Default_Axis_Steps_Per_Unit { 100, 100, 1600, 98 }</Code> Acceleration <Code>#Define Default_Max_Acceleration { 2000, 2000, 75, 4000 }</Code> <Code>#Define Default_Acceleration 400 // X, Y, Z And E Acceleration For Printing Moves</Code> <Code>#Define Default_Retract_Acceleration 1500 // E Acceleration For Retracts</Code> <Code>#Define Default_Travel_Acceleration 1200 // X, Y, Z Acceleration For Travel (Non Printing) Moves</Code> <Code>#Define Default_Xjerk 20.0</Code> <Code>#Define Default_Yjerk 20.0</Code> <Code>#Define Default_Zjerk 0.5</Code> <Code>#Define Default_Ejerk 5.0</Code> Arduino 1.8.5
Statistics
Likes
8
Downloads
0