Nerf Automatic Pusher
Description
Update 11-18-18 Major Update: Lengthened Slightly And Added Dwell For More Stability. Fire Control Tabs Added If You Want To Put In A Cherry Submini Switch For Fire Control. Old Version Is Still Available In Minimal_Pusher.Zip. ===== This Scotch Yoke Pusher Design Is Designed To Be A More Stable Variant For A Printed Autopusher. The Minimal Version Is Good For Those Builds Where You Want To Put An Auto-Pusher In A Stryfe/Rayven/Etc. Compared To A Rapidstrike Pusher, This Gets Rid Of Two "Unnecessary" Small Gears And Relocates The Motor. It Also Increases The Gear Ratio To 40:1, Which Enables The Motor Relocation But Boosts Fire Rate By 50%. Recommended Usage On 2S With Either Fang Revamped For 13-14 Dps Or A Torquey 3S Motor For 9-10 Dps. Required Additional Components: 1Xx Size Hobby Motor M2X5 Motor Mounting Screw 4-40 Nut (2) 4-40 Screw - 3/8" Or 1/2", Any Head (2) Rapidstrike Worm Gear Or Half Of An Ajax Scientific Worm Gear (Https://Www.Amazon.Com/Ajax-Scientific-Plastic-0-82Cm-Diameter/Dp/B00Epqmkhq/) 3/32" Steel Pin As Axle. Alternate Components Can Be Substituted - A Stiff Piece Of Wire Was Used Once During Testing.
Statistics
Likes
140
Downloads
0