Turbowing Cyclops Camera Mount
Description
This Is A Mount For The Turbowing Cyclops V2 Camera Designed To Fit The Gemini 2.5 Frame (26Mm Spacing) Or The Mib 2.5 Frame (19Mm Spacing). - The Spacing Of The Holes Is 26Mm Or 19Mm, Designed To Line Up With Front Standoffs On Frame. - The Mount Has 2 Parts, Top And Bottom Which Screw Together Using M2X10Mm Screws. Choose The Bottom That Fits Your Frame, Top Is Same Regardless - This Mount Fits The Camera With A Modified Lens (M7 1.8Mm 180 Deg) - The Stock Lens (120 Degree) Is Longer And Won'T Fit Well Inside This Mount - I Used A Zip Tie To Tension The Camera Rearward To Reduce Vibration (See Photo) Update 7/23/18 - Modified The Top Piece To Include A Retaining Strap For The Sd Card. This Strap Wraps Around The Back Of The Camera And Secures To The Other Side Using A Small Screw. - Added A Guard That Fits On The Side Of The Cyclops Camera In Front Of The Sd Card. This Guard Should Be Glued Into Place And Serves As A High Point To Prevent The Sd Card From Ejecting In A Crash.
Statistics
Likes
5
Downloads
0