Mid-Century 4-Way Traffic Light
Description
###1/4 Scale Mid-Century 4-Way Hanging Traffic Light Designed In Fusion 360 As A Practice Piece. Glue The Pieces Together. Should Be Possible To Fit Leds Or Other Small Light Sources Into The Reflectors. The "Hanger" Piece Has A Hollow Tube In It That Wires Can Be Run Through Just Like On The Real Thing. **Note:** The Main Body Piece Is Oriented Upside-Down For Support-Free Printing. It Was Originally Too Delicate And I Added Some Internal Support Structure So It Would Not Snap Into Pieces While Printing. **6/30/18** - Replaced Hanger Stl- The Original One Was Not Completely Hollow. Messed Up On The Order Of Operations In Cad. Fixed. I Have Everything Printed Now, Except The Lenses. **7/1/18** - I Have All The Parts Printed, They All Came Out Ok. Next Step - Sand/Polish The Reflectors And Paint Them Silver, Then Mount Leds And Wiring. **7/29/18** - I'Ve Finally Completed The Light. Didn'T Actually Sand/Polish The Reflectors. Just Painted Them Silver. I Added Leds And A Arduino Leonardo Compatible Micro Board Stuffed Into The Top Cover To Control It. The Arduino Sketch And A Hand-Drawn Schematic Are Included. I Used A Cheap Cell Phone Charger And Micro-Usb Cable To Power It. Had To Cut And Re-Splice The Usb Cable Back Together To Get It Through The Wire Tube In The Hanger. Link To The Board I Used: Http://A.Co/Cepwbvj Added A Led Adapter Piece I Used To Hold/Glue The Leds Into The Reflectors.
Statistics
Likes
108
Downloads
0