east3d gecko inductive endstop sensors mount
Description
Mounts For East3D Gecko. With These You Can Replace Original Mechanical Endstop Switches With Nice, Tiny And Silent Proximity Sensors. Designed For Sunx Gl-8H Sensors, I Bought Mine [Here](Https://Www.Aliexpress.Com/Item/2Pcs-Gl-8F-Gl-8Fb-Gl-8H-Gl-12F-Gl-8Fu-Gl-18H-Proximity-Sensor-Subminiature/32767279429.Html) (Don'T Forget To Make A Note To Seller That You Need Exactly Gl-8H, Otherwise He Will Send Other Model) You Will Also Need: - M3X8 Or M3X10 Screws, 3Pcs - M2.5X8 Screw, 1Pc (That'S For Y Axis Endstop, Original M2.5X16 Screw Is Way Too Long And Would Rub The Belt; However, You Can Cut Off Excessive Length With Saw) #Important Notes: **Please Note That X Axis Sensor Must Be Mounted Upside Down (Refer To Photo). And After All, You'Ll Have To Adjust Endstop Settings Of Your Lerdge Board, Changing Trigger Mode From High To Low (Refer To Lerdge Board Instruction Manual)** Wiring Diagram Is Also Included.
Statistics
Likes
13
Downloads
0