Tokyo Marui AA12/SGR12 M4 Mag Adaptor
Description
Maybe This Is A Redundant Piece Model Now That Tokyo Marui Has Released Their High Cap Magazine For The Aa12/Sgr12, But I Though I Would Release It Still As Most People Have M4 Mags. Please Note I Have Only Used This With Lonex Flash Mags, And Many Other M4 Mags Will Probably Not Fit. If You Leave A Comment Telling Me Quite Specifically What You Need To Change To Fit Your Mags And Would Like An Updated Model, Then Please Comment And I Will Try To Help. For Maximum Smooth Feeding, This Requires A Feed Spring Inserted Inside. For Maximum Durability It Requires A Short ~14Mm Section Of Old Outer Barrel For The Spigot That Pushes Into The Mag. I Just Cut A Piece Of An Old Barrel And Rounded The End That Pushes Into The Mag Slightly With A File. You Could Of Course Print A 14Mm Long 8.5Mm Od 6.5Mm Id Tube Instead, But I Think It Will Wear. As With My M870 M4 Mag Adaptor, This Requires A V3 Motor Height Spring For The Button, And An M3 Screw Around 35Mm Long. You Can Buy The Spring Here: Https://Www.Retroarms.Com/Other/Bowden-Spring-For-M249-M60-Mags I Printed Mine Upside Down. You Can Buy The Spring Here: Https://Www.Retroarms.Com/Other/Bowden-Spring-For-M249-M60-Mags
Statistics
Likes
7
Downloads
0