SRAM GXP Pressfit Bottom Bracket Tool 12mm Rod
Description
I Tried To Use The Tool Already Here, But Found It Difficult Due To Few Details: - 8Mm Rod Doesn'T Seem Sturdy Enough For Keeping Things Straight - The Plates Were Too Loose Fit For The Bearings I Got, Causing Proper Alignment Problem So I Measured The Bearings And The Frame Bb Diameter, Designed The Plates Myself, Played With The Sizes Until I Got A Snug Fit On The Cups With Bearings And The Frame Plate. Also Decided To Use 12Mm Threaded Rod And Make The Plate Shafts A Little Longer. The Plus Was That I Already Had Some Big Sturdy 12Mm Penny Washers Around And Once Everything Was Snug Enough I Used To Tool To Fit The Sram Gxp Pressfit Bottom Bracket Onto My Ghost Lector 5Lc Bike And It Worked Perfect. I Will Upload The *.Scad File In A Few Days Once I Add Some Comments To It (There Is Really Just 3-4 Values That Make Sense To Adjust) And Also The Picture Of The Printed And Assembled Tool. //Uploaded 08/07/18
Statistics
Likes
36
Downloads
0