Deltaprintr KS Piezo Bed leveling
Description
After Battling For A Number Of Years With The Bed Leveling Force Sense Resistors On My Deltaprintr Ks, I Decided To Have A Go At Piezoing It. The Fsrs Have Worked Well, But The Second One Has Failed. I Could Replace It From A Spare, But Maybe It Is Time For A Change. So Far, I Have Not Finished This But In The Next Few Days I Hope To. The Parts Are Printed At 0.1Mm Layers, 100% Infill. 27Mm Piezo Disks Are Used. The Piezobase Part Has Support Touching The Build Plate. If You Don'T Want To Build Your Own Electronics, Have A Look At... Https://Www.Precisionpiezo.Co.Uk/ He Has Done A Great Job! Files To Edit Here.... Https://Www.Tinkercad.Com/Things/1Rzp7Ywnvpr-Deltaprintrpiezo When I Get It Going I'Ll Post Circuits And More Pictures. Edit: It Is Still A Project. I'Ve Added A Mod For The Top Part To Have A Pushbutton In It. And Removed The Unused Version Of The Top. Another Edit: This Works Well :) Now I Have To Clean It Up And Post The Circuit I Used. Also, I Have To Put A Non Slip Surface On The Pushbutton As The Acrylic Disk Base Slides Around On The Pla. Edit: Added Some Felt Pads To The Buttons For Non Slip. And Have A Concrete Paver Under The Printer For A Bit More Stability.
Statistics
Likes
8
Downloads
0