Terraforming Mars - Player Mat Overlay
Description
Yet Another Terraforming Mars Player Mat Overlay... ### Features - Custom Grid Insets To Hold Production Cubes - Additional Spaces For Production Cubes (20 And 30) - Edges For Sticking Photo Corners To Hold Original Player Mat In Place ### Note This Player Mat Overlay Is Designed For Cubes W/ Side Length Around 8.33Mm (+/- Some Tolerance). I Had Reports Of Cubes Being Bigger And Not Fitting The Grids. Make Sure To Measure Your Cubes Or Print A Grid First To Test The Fit Before Printing The Whole Thing. ### Choices Choose A Body: 1. [Standard Body](Https://Www.Thingiverse.Com/Download:5096626) 2. [Body Variation W/O Wall Between Energy And Heat](Https://Www.Thingiverse.Com/Download:5113845) Choose Grids (Note: Grids Are Compatible With Either Body): 1. Standard Grids ([Big](Https://Www.Thingiverse.Com/Download:5096619) & [Small](Https://Www.Thingiverse.Com/Download:5096620)) For [Original Production Sheet](Https://Www.Thingiverse.Com/Download:5096621) (10/20/30 In Separate Column On The Right) 2. Uniform Grids ([Big](Https://Www.Thingiverse.Com/Download:5198312) & [Small](Https://Www.Thingiverse.Com/Download:5198313)) For [Alternative Production Sheet](Https://Www.Thingiverse.Com/Download:5198504) (Ascending Numbers W/ 10/20/30 At The End). **Note**: In Case Your Printer'S Tolerance Requires Some Fine-Tuning, You Can Use The Customizer To Modify The Allowance And Chamfers Of The Uniform Grids ### Instructions * 3D Print The Body, One Big Grid And 5 Small Grids * 2D Print The Production Sheet Pdf (W/O Scaling) And Cut Along The Markers (Or Feel Free To Design Your Own) * Put The Cut Pieces Of Paper Into The Recesses And Press The Grids On Top (Note: The Grids Have A Chamfer. Make Sure The Chamfer Is Oriented Downwards) * Optional: Put Photo Corners On The Edges (Backside Of Body) To Hold The Original Player Mat In Place ### Edits - 2018-07-08: Added A Variation Of The Body W/O Wall Between Energy And Heat Resources - 2018-08-02: Added A Variation Of The Grids With Uniform Spacing And A Production Inset For Use With The New Grids With Numbers In Ascending Order (10/20/30 At The End). Attached A Picture Showing The (Uniform) Grid Dimensions As Well. - 2018-08-13: Allowed For The Uniform Grids To Be Customized To Fine-Tune The Fit (Depending On Your Printer'S Tolerance)
Statistics
Likes
415
Downloads
0