Pi 3B Case for Prusa MK3
Description
**Note:** This Is For A Raspberry Pi Model 3/3+ [See Here](Https://Www.Thingiverse.Com/Thing:4525601) For The Pi 4 Version. I'Ve Seen Many Cases For Mounting A Raspberry Pi To The Mk3 Over The Einsy Case. This Mounts A Raspberry Pi 3B On The Right Side Under The Bed, Which Makes Cable Management A Bit Cleaner. Print The Bottom Part And One Of The Tops Depending On Whether You Need A Slot For The Camera'S Ribbon Cable Or Not. Also Needed: * 1X M4 T-Nut For 30X30 Extrusion * 1X M4X10 Cap (Or Pan Head) Screw. * 2X M3 Square Nuts * 2X M3X 8Mm Cap Screws Up To 12Mm Length Should Work Be Sure To Look For Drop-In T-Nuts, So They Can Be Inserted Without Disassembling The Frame. I Wouldn'T Necessarily Recommend Buying Any Of The Following, Because The Kits Contain Too Many Parts For This Project, But For Reference I Built My Pi Case By Pulling From The Following Products: Https://Www.Amazon.Com/Gp/Product/B0785Pjztp - M4 T-Nuts For 30X30. Https://Www.Amazon.Com/Gp/Product/B015A351Ws - M4X10 Cap Screws Https://Www.Amazon.Com/Gp/Product/B018503K94 - M3 Square Nuts Https://Www.Amazon.Com/Gp/Product/B072Fkmymf - M3 Cap Screw Kit (Various Lengths) Starting Your Shopping In The Prusa Spares Bag Is A Good Idea.
Statistics
Likes
163
Downloads
0