Tronxy X5 - Bed Stabilization Synchronization 3 Stages
Description
Tronxy X5: Bed Stabilization Project. 3 Possible Stages. - Usable With One Arm Only, Two Arms Or At Least Complete With Lead Screw And 2Gt Belt... Warning: If Your Are Printing At High Temperatures The Heat May Melt These Items! ! Insulate The Heating Bed´S Bottom Side Very Well. (A A Good Hint Anyway.) ! And You May Use Filament With Better Thermal Resistance To Print These Items, Such As Abs. A. For One Arm, You Need: - One Linear Rod 8 Mm About 500Mm And One Lm8Uu Bearing - Two Clamps For Holding The Rod, Four Screws And Profile Nuts (You´D Better Use The "...Klemme2" Version.) - Optional: Bed Leveling Wheels, One M3 Nut Each B. For Two Arms, You Need: - Two Linear Rods 8 Mm About 500Mm And Two Lm8Uu Bearings - Four Clamps For Holding The Rods, Eight Screws And Profile Nuts (You´D Better Use The "...Klemme2" Version.) - Four Screws M4X20 With Nuts And Washers For The Connecting Piece - Optional: Bed Leveling Wheels, One M3 Nut Each C. For Two Arms, You Need: - Two Linear Rods 8 Mm About 500Mm And Two Lm8Uu Bearings - Four Clamps For Holding The Rods, Eight Screws And Profile Nuts - Four Screws M4X20 With Nuts And Washers For The Connecting Piece (They Can Be Printed, Better Use The "...Klemme2" Version.) - Optional: Bed Leveling Wheels, One M3 Nut Each -- One Lead Screw With Same Angle Like Your Existing One. Length 500Mm, Has To Be Cutted To Fit In. -- One Brass Nut, Fitting To The Lead Screw -- Two Pillow Block Flange Bearings 8Mm Kfl08 And Screws And Profile Nuts -- One Closed Belt 2Gt-840 (Can Be Longer) -- Two Pulleys 8Mm For 2Gt For Lead Screws - Better With More Teeth, Maybe 36. (They Can Be Printed. Need M3 Nut And M3X10 Screw Each) -- One Pulley With Gear (Bearing) To Tight The 2Gt Belt. In My Case 3Mm With 20 Teeth, And A Fitting Screw Plus Nut. (I Used M3X30. You Might Use Some Washers To Allign The Belt´S Run In The Pulley Perfectly) !!!Take Your Time And Patience For Alligning The Parts. A Gentle Movement Makes Fine Prints!!! German: Der Text Kommt Spaeter.
Statistics
Likes
25
Downloads
0