Anet A8 Bowden E3D Mount Carriage with SN04 - 63mm E3D
Description
This Is A Work In Progress!! Anet A8 E3D Mount For A 63Mm E3D Clone, Bowden Type, With 40Mm Fans. I Wanted To Use The Spiral Vase Linear Bushing, So Had To Print The Sc8Uu Too. You Can Use The Original Ones. Sources: Base Plate: Https://Www.Thingiverse.Com/Thing:2099577 *Added 4 Holes For E3D Main Body. There Are Two Versions For Screw Caps Of The Sc8Uu. The Screws That I Used Have A Large Cap. Main Body, Hot End Clamp And Cable Clamp: Https://Www.Thingiverse.Com/Thing:2023947 * Changed The Main Body For The Sensor Sn04 And Added The Mount For A 40Mm Fan. Extruder Fan: Https://Www.Thingiverse.Com/Thing:2603218 * Changed The Position Of The Holes For Screw In Order To Work With The Hot End Clamp. Safty Pin: Http://Www.Thingiverse.Com/Thing:1323031 The Bearings: Https://Www.Thingiverse.Com/Thing:2537701 The Scs8Uu: Https://Www.Thingiverse.Com/Thing:2667680 Screws Needed For This Mount, Without The Screws For Fans. 4 Pcs: M3X14 4 Pcs: M3X10 6 Pcs: M3X20 6 Pcs: M4X10 6 Pcs: M4X25 Marlin Min Pos: #Define X_Min_Pos -12 #Define Y_Min_Pos -10
Statistics
Likes
20
Downloads
0