8/12/12 Bronze Bearing Holder replacing SCS8UU (Anet A8)

Description

This Thing Is Meant To Replace The Standard Bearing Blocks (Scs8Uu) Of The Y-Axis Of The Anet A8. Since The Scs8Uu Is Widely Used And This Thing Provides The Same Distance From The Top To The Center Of The Rod It Should Be Possible To Use It Also If For A Variety Of Other Printers Or For The X-Axis. This Thing Is Intended To Be Used With Sintered Bronze Bearings 8/12/12 (Inner Diameter/Outer Diameneter/Length) Which Can Easily Be Acquired Online. In Order To Mount This Thing To The Heatbed Holder M4 Screws Are Needed. Depending On The Thickness Of The Heatbed Holder Used Something Like M4X20 Or M4X24 Might Be The Right Choice. In Case The Sintered Bronze Bearing Is Not Sitting Tightly In This Bearing Holder, This Thing Has Tiny Holes Which Can Be Used To Fixate The Bearing Inside The Holder E.G. By Using A Bent Paperclip (Never Needed To Do That Though).

Statistics

Category

Tags