Strida Bicycle Electric Conversion Kit
Description
Parts I'Ve Designed To Convert A Strida Bicycle Into Electric. The Motor Is A Unit I'Ve Bought Second Hand From Atm Breakers. I'M Guessing It Is Around 100W. Is An Industrial 24V Dc Motor Strong Enough To Push The Strida On A Flat Surface. Any Motor Matching The Sizes Of The Mounting Holes Can Be Used. I'Ve Used A Dc Motor Controller I Bought From Aliexpress. My Motor Uses Around 3Amps While Pulling The Bike On Flat Surface. So A 24V 10Ah Power Pack Should Be Quite Adequate For 1-2 Hours Of Riding Min. There Is A One Sided Ball Bearing & Clutch Part Between The Octopus Part And The Large Gear To Enable The Wheel To Turn Freely When No Power Is Applied To The Motor. The Large Gear Modeled To House A 9Mm Wide M3 Belt With 940Mm Circumference. The Belt Can Be Tightened By Using The Single Large Screw Next To The Motor. I'Ve Used This Product For Pwm Power Control Of The Dc Motor. Https://Tr.Aliexpress.Com/Item/0-100-Digital-Display-Stepless-Speed-Regulation-6V-60V-Pwm-Dc-Motor-Speed-Controller-Switch-Controller/32844140253.Html?Spm=2114.13010708.0.0.489B4C4D5Xrkei Here Is The Complete Build Album In Facebook Https://Www.Facebook.Com/Ozkal.Ozsoy/Media_Set?Set=A.10155765466640748&Type=3
Statistics
Likes
37
Downloads
0