18650 Battery Organizer
Description
This Is A 18650 Battery Storage/Organizer For 10 Batteries With Separated Rubber Feet . Nb! Protected 18650 Batteries May Not Fit In This Holder ,Have Not Tried These Batteries Since I Do Not Have Any :-) . Print Time Around 9-10 Hours Depending On Slicer Settings. If You Found This Design Very Helpful Or Otherwise Wish To Support Me ,You Can Buy Me A Cup Of Coffee ( Helps Keeping The Brain Active So I Can Create New Stuff ) ;-) ,Then Please Consider Using This Link : <A Href="Https://Www.Buymeacoffee.Com/Mb1Vzjxug" Target="_Blank"><Img Src="Https://Bmc-Cdn.Nyc3.Digitaloceanspaces.Com/Bmc-Button-Images/Custom_Images/Black_Img.Png" Alt="Buy Me A Coffee" Style="Height: Auto !Important;Width: Auto !Important;" ></A> The 2 Parts Are Meant To Be Pressed Together Without Glue , But Depending On Witch Printer Or Slicer Software You Are Using There Can Be Some Difference In The Way Of How Easy Or Hard They Will Be Pressed Together So Please Be Aware Of This . I Recommend Printing This With 50% Infill But I Have Printed One With 20% Infill Without Any Issue ,But I Think It Will Be Wise To Get The Slicer To Make The "Pegs" With 50% Infill If You Consider To Print The Rest In 20% Infill . I Have Printed This With 0.2Mm Layer In Pla-Max And In Gun-Metal Pla ,215 Degree Hotend ,70 Degree Heatbed And Around 50% Blower . Nb! The 18650 Battery Organizer Was Printed With The Creality Cr10S But The Rubber Feet Was Printed With The Prusa I3Mk3 ,And The Rubber Is Ninjaflex. These Feet Is All-So Printed In 0.2Mm Layer ,240-250 Degree Hotend And 50 Degree Heatbed ,With No Blower At All Or At Least With Very Little Blowing ,Since The Rubber Will Clog Up The Hotend If The Blower Is Sat Too High ,It Prints Very Very Nice With The Prusa :-) Warning ! I Have Printed This Model On Both The Creality Cr-10S And The Prusa I3Mk3 (And I Know The Result Depends On Both The Printer And The Slicer You Are Using ) ,I Did Slice Both Models In Slic3R Prusa Edition "Some Custom Settings" The Version From Prusa I3Mk3 Was Overall The Nicest One ,Though Creality Cr10 Came Close ,Only Thing Is That On Some Of The Round Edges You Can See Some Weird Artifacts ,Ruining The Overall Nice Surface ,This Was Not On The Version From The Prusa I3Mk3 . And One Last Thing ,The Prusa I3Mk3 Did Not Print The Joining Pegs With The Correct Diameter ,It Should Have Been 6 Mm But Ended Up With 5.7Mm ,Though Odd Enough The Holes For The Pegs Ended Up Perfectly With 6.3Mm ,And Therefore The Model Properly Will Be A Bit Loose If You Print It On The Prusa ,But Fit Perfectly Tight Printed With The Creality Cr10 . Sorry For The Very Long And Boring Text ,But I Had To Give You This Information Before Printing This Model . If You Choose To Download And Print This And Ends Up With Frustration In Joining These To Half ,Then Do Leave Me A Message And I Will Change The Holes Or Pegs In Size .
Statistics
Likes
108
Downloads
0