sliced light
Description
Update : Http://Www.Thingiverse.Com/Thing:895579 This Project Was Done Just For Fun In Two Days. Ijust Finsihed Building My 3Dr Delta And Calibrating It. After Making A Few Prints I Thought Of Doing Some Light Painting By Mounting A Led On The Head Of The Printer. The Led Is Connected To The Servo Pin 1 Of The Ramps . Marlin Has A Nice Gcode Extension ( M42 )Where A Pin On The Arduino Can Be Toggled On And Off . I Used This To Toggle The Arduino Pin D11 On And An Off.. Next Was The Problem Of Creating Custom G-Code To Do That.. I Used Grasshopper3D To Make A Custom Script To Create A Simple G-Code Which Creates Lines Every 3Mm In The Model.. The Model Doesn'T Even Need To Be Water Tight. Also For Simplicity I Keep The Feed Rate Constant At 3500 ( Which Is Okay For The 3Dr ) .. I Even Tried A Dashed Pattern But It Is Only Visible In The Fox Model. Next Step To Add A Rgb Led And Get Some Color Http://Vimeo.Com/97840567 Http://Hackaday.Com/2014/06/11/Dslr-Gives-Exposure-To-3D-Light-Traces/
Statistics
Likes
274
Downloads
0