Arcade Fight Stick Joystick
Description
I Originally Designed This Because I Wanted To Use The Longer Arcade Buttons (I.E. Https://Www.Banggood.Com/5V-Arcade-Push-Button-Durable-Long-Switch-Multicolor-P-957099.Html ) Which Are Not Compatible With The Design By Elkayem. It Is Designed In A Way That You Are Able To Flip The Top Part, So You Can Decide Whether You Want The Joystick Left Or Right. The Usb Controller I Used Is Called 'Zero Delay Arcade Usb Encoder'. I Printed One With White Pla And One With Wood, Both Using The Same Resolution And Infill. One Thing To Note Is That I Had To Sand Down The Wood One Before I Was Able To Put The Bottom And Top Part Together Whereas The White Pla One Instantly Worked The Joystick Is Hold In Place By 4X M4 Nuts & Screws. Printed On An Anycubic I3 Mega, I Had To Adjust The Printer Settings To Be Able To Slice It With Cura (X: 215, Y: 215, Z: 205) Although There Are Holes Present To Screw The Top And The Bottom Part Together I Did Not Do This, Because Mine Are Already Very Tightly Connected And Will Not Come Loose
Statistics
Likes
71
Downloads
0