E12 Shroud + EZABL Mount V2
Description
This Is My.......Hmmmm.....3Rd?...No.......7Th?...Maybe.......Ehh, Who Cares. I Have No Idea How Many Times I'Ve Remixed This. I'M Actually Happy With The Design I Have Now. I Have One Very Small Thing To Change, But I'Ll Get To That Another Day. The V2 Version Has The Bottom Frame Screw Hole Shifted 1.5Mm To The Left. It Was Too Tight To Make This Easy To Mount, And When You Finally Did, It Wasn'T Quite Level. This Should Fix That. There Is A Bit Of Play In The Screw Hole, So You Don'T Have To Be Exact, But This Should Make The Ezabl Sit Perpendicular To The Build Plate. This Version Is For The E10/E12, And Uses The Stock Fans, And Includes An Ezabl Mount At A Good Height (Original From Th3D Was 20Mm Too High). The Second File (E12_Shroud.Stl) Is The Shroud Itself, Without The Ezabl Mount. Yes, You Can Print This In Pla, And It Works Just Fine For Pla Prints. I'M Not Sure How It'Ll Hold Up To An Abs Print, As That Area Will Get Much Hotter. You'Re Welcome To Try, Or Print One In Abs Yourself. I'M Not Set Up For Abs Printing Here. =============================================================== If You'D Like To Support My Work, Or Buy Me A Monster (I Don'T Drink Alcohol Or Beer), You Can Head Over To My Patreon Page: Www.Patreon.Com/M1Dn1Ghtn1Nj4 A Portion Of Every Months Earnings Goes To A Charity Chosen At The End Of The Month!
Statistics
Likes
20
Downloads
0