TTGO 2.1 ESP32 Paxcounter LoRa TTN OLED Case
Description
This Is A Case For The Ttgo Version 2.1 Esp32 Lora Development Board With External Antena. Designed For The [Esp32-Paxcounter](Https://Github.Com/Cyberman54/Esp32-Paxcounter/) Project. The Case Allows Access To All The Connectors As Well As The Reset Button. There Is Also A Compartment For A Small Battery Or An Accumulator. The Case Has Hexagonal Openings For Ventilation Since The Chip And The Battery May Become Warm. # Optional: Fixing Covers With Screws Covers Normally Fit Pretty Tighly Into The Case. Still, You May Want To Use Screws To Fix The Covers Firmly. The Case Has Prepared Holes For This Purpose. You Will Need 7 Pt-Screws (Pt-Schrauben Auf Deutsch) Of Size 1.8X16. You Will Also Need To Drill 7 Holes In The Box In The Prepared Locations With A 2Mm Drill. A Torx T5 Or T6 Screwdriver Will Be Required As Well. # Optional: Plexiglas Shield You May Want To Protect The Oled Screen With A Plexiglas Shield. For This, Order The Laser Cut-Out Of The Shield. Svg Of The Design Is Included In The Thing Files. It Contains 12 Pieces To Fit The Smallest Material Size On [Formulor](Https://Www.Formulor.De). You Will Also Need A Single Additional Pt-Screw Of Size 1.8X4. # Sourcing **Disclaimer:** I Have No Affiliation With Any Of The Listed Shops. ## Germany * Pt-Screws - [Screwerk](Https://De.Screwerk.Com), Search For Kn6041. * Laser-Cut Plexiglas Shield - [Formulor](Https://Www.Formulor.De). # Updates * 25.07.2018 - Added A No-Accu-Box Variant.
Statistics
Likes
16
Downloads
0